Apple TV-Einrichtung für intelligenten DNS-Proxy

Die Befolgung der Installationsanweisungen ist nur einmal erforderlich. Sobald Sie die anfängliche Einrichtung abgeschlossen haben, brauchen Sie die gleichen Schritte nicht mehr auszuführen. Ihre Verbindung wird automatisch funktionieren *jederzeit! (solange sich Ihre IP in unserer Datenbank befindet - bitte lesen Sie die Informationen am Ende dieser Anleitung)

Unten finden Sie unser kurzes Video über die Einrichtung von Apple TV. Unterhalb des Videos finden Sie eine Schritt-für-Schritt-Anleitung:

--- --- ---

If you are planning to use AppleTV we recommend you to configure your router. Please find router configuration details in our How to Setup page. With router setup all your devices in the network connected to your router gets access to Smart DNS Proxy.

*** UPDATE (2014-August) Netflix Application is now forces you to have 1st router setup (click here how) and 2nd static ip routing (click here how). ***

--- --- ---

If you don't have access to the router you are connected to, please find Smart DNS Proxy setup instructions for AppleTV below:

1. On Apple TV, go the Settings > General > Network.

2. Select Wi-Fi for wireless network or Ethernet if you have wired connection. For wireless network, you'll have to select Wi-Fi network and may need to enter Wi-Fi password (if you didn't do it before).

3. Go to Configure DNS and switch it to Manual.

4. Enter following Smart DNS Proxy IPs for Preferred DNS server and Alternate DNS Server and click "Done":

From the following use the closest dns server to your physical location as Preferred DNS Server, and second closest dns server to your physical location as Alternate DNS server.

Die Liste der IP-Adressen unserer DNS-Server finden Sie auf unserer DNS-Server-Liste hier: https://www.smartdnsproxy.com/Servers.

5. Confirm on "Network" screen the DNS address is the numbers you entered (leading zeros will be omitted).

6. Go the Settings > General > iTunes Store > Location.

7. Select United States.

8. Return back to main screen.

9. Put the Apple TV to sleep with the Sleep Now command in Settings.

10. Unplug the Apple TV power cord.

11. Wait ten seconds.

12. Plug the Apple TV back in.

Attention

Make sure to RESTART your AppleTV!

* Remember whenever your AppleTV/Router IP changes, our service will stop working for you. You will need to LOG INTO Smart DNS Proxy and UPDATE your IP address so that our system could check your IP address and add your new IP to our database. Then, you will be able to continue using our service. If this is the first time you set up, we also suggest you to log in with your PC to our site from the same Wired/Wireless network to show our system your IP address.